Ford Transit 2002 Owner's Manual page 526

All vehicles
CAUTIONS:
1.
Never install a used timing belt.
Only install the timing belt after the
engine has cooled to workshop temperature.
Disconnect the battery ground cable.
For additional information, refer to:
Disconnect and Connect
Mounting and Cables, General Procedures).
2. Remove the valve cover.
For additional information, refer to:
(303-01B Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel, In-
vehicle Repair).
3. Detach the coolant expansion tank and position
it to one side.
4. Remove the charge air cooler cover.
5. Disconnect the intake air temperature (IAT)
sensor electrical connector.
6. Remove the charge air cooler.
http://vnx.su
Battery
(414-01 Battery,
Valve Cover