Ford Transit 2002 Owner's Manual page 528

All vehicles
13. Install the special tool.
Remove the cylinder block blanking plug
and install the special tool.
14. Detach the starter motor and position it to one
side.
NOTE: Only turn the crankshaft in the normal
15.
direction of rotation.
Turn the crankshaft to TDC.
Turn the crankshaft slowly until the
crankshaft stops.
CAUTIONS:
16.
Make sure that the crankshaft does not
rotate during installation of the special tool.
Make sure crankshaft is at the TDC
position before locking the special tool.
Make sure that the special tool engages
correctly.
Using the special tool, lock the crankshaft.
17. Lower the vehicle.
18. Install the special tools.
http://vnx.su