Ford Transit 2002 Owner's Manual page 197

4. Attach the clutch master cylinder actuating rod
to the clutch pedal.
5. NOTE: Locate the clutch master cylinder into
the pedal bracket holes.
Attach the clutch master cylinder to the pedal
bracket.
1. Install the bolts.
2. Install the clip.
NOTE: Install a new brake booster actuating
6.
rod pin.
Install the brake booster actuating rod pin.
1. Depress the brake pedal.
2. Install the brake booster actuating rod pin.
CAUTION: Make sure there is clearance
7.
between the brake pedal and the brake pedal
retractor to allow free movement.
Align the brake pedal retractor arm to the brake
pedal bracket (if equipped).
8. Tighten the brake booster retaining nuts.
http://vnx.su