102.
CAUTION: Make sure the tool used to
tighten the high-pressure fuel supply line
unions is used at the top of the union as this
is where there is most material. Failure to
follow this instruction may result in damage
to the union.
Tighten the high-pressure fuel supply line unions
of cylinder two and three to the fuel supply
manifold.
NOTE: Make sure the clamps are installed in
103.
the same position as removed.
Tighten the high-pressure fuel supply line
clamps.
104.
CAUTION: Cover the high-pressure fuel
pump opening to prevent dirt ingress.
Tighten the high-pressure fuel supply line clamp
retaining nut.
105. Connect the high-pressure fuel pump electrical
connectors.
106. Connect the high-pressure fuel sensor electrical
connector.
107. Connect the knock sensor (KS) electrical
connector.
http://vnx.su