Ford Transit 2002 Owner's Manual page 689

18. Apply sealer to bearing cap number one at the
positions shown.
19. NOTE: The arrows on the camshaft bearing
caps must point to the front of the engine.
NOTE: Do not tighten the camshaft bearing
caps at this stage.
Install the camshaft bearing caps.
NOTE: Tighten the camshaft bearing cap
20.
retaining nuts and bolts evenly, a turn at a
time.
Tighten the camshaft bearing cap retaining nuts
and bolts.
NOTE: Install a new camshaft oil seal.
21.
Using the special tool, install the camshaft oil
seal.
22. NOTE: Make sure that the fuel injectors are
installed in their original position.
NOTE: Install new fuel injector to cylinder
http://vnx.su