Engine-1.8L Duratorq-Tdci/Tddi (Lynx) Diesel-Camshafts - Ford Transit 2002 Owner's Manual

Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel -
Camshafts
In-vehicle Repair
Materials
Name
Gasket Eliminator
Sealant
Specification
WSK-M2G348-A5
1. Remove the camshaft seal.
For additional information, refer to:
Seal
(Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
In-vehicle Repair).
2. Check the valve clearances.
For additional information, refer to:
Clearance
(Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
General Procedures).
3.
bearing caps number one, three, and five by
one turn each until the camshaft is released.
NOTE: Keep the nuts and camshaft bearing
caps in order.
Remove the camshaft.
NOTE: Keep the valve tappets and
4.
adjustment shims in order.
Remove the valve tappets and adjustment
shims.
Installation
NOTE: Coat the valve tappets and
1.
adjustment shims with clean engine oil.
Install the valve tappets and adjustment shims.
2. NOTE: The larger semi-circle points upwards.
Install the camshaft.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
(303-01B Engine - 1.8L Duratorq-TDCi
(303-01B Engine - 1.8L Duratorq-TDCi
CAUTION: Loosen the nuts of camshaft
Print
Camshaft
Valve