Ford Transit 2002 Owner's Manual page 299

Cap the power steering line to prevent
fluid loss or dirt ingress.
Cap the power steering pump pressure
adapter to prevent fluid loss or dirt ingress.
Disconnect the power steering line union from
the power steering pump.
1. Using a suitable wrench, hold the power
steering pump pressure adapter.
2. Disconnect the union.
Allow the fluid to drain into a suitable
container.
Discard the O-ring seal.
12. Remove the power steering pump.
13. Remove the power steering hose.
Installation
CAUTION: Care must be taken to
1.
prevent dirt ingress.
Install a new O-ring seal onto the power steering
pump to steering gear line union.
2. To install, reverse the removal procedure.
3. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
Steering System - General Information, General
Procedures).
http://vnx.su
Power
(211-00 Steering System
(211-00