Ford Transit 2002 Owner's Manual page 309

the power steering pump.
1. Using a suitable wrench, hold the power
steering pump pressure adapter.
2. Disconnect the union.
Allow the fluid to drain into a suitable
container.
Discard the O-ring seal.
NOTE: Note the position of the power
12.
steering line to aid installation.
Remove the power steering pump to steering
gear pressure line.
Installation
1. CAUTION: Care must be taken to
prevent dirt ingress.
Install a new O-ring seal onto the power steering
pump to steering gear line union.
2. Install new O-ring seals onto the power steering
lines.
3. To install reverse the removal procedure.
4. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
Steering System - General Information, General
Procedures).
http://vnx.su
Power
(211-00 Steering System
(211-00