Ford Transit 2002 Owner's Manual page 116

3. Remove the front wheel and tire. For additional
information, refer to Section
Tires.
4. CAUTION: Leave the tie-rod end
retaining nut in place to protect the ball joint
stud.
NOTE: Use a 5 mm Allen key to prevent the
ball joint from rotating.
Loosen the tie-rod end retaining nut.
CAUTION: Protect the ball joint seal,
5.
using a soft cloth to prevent damage.
Using the special tool, detach the tie-rod end
from the wheel knuckle.
1. Release the tie-rod end.
2. Remove the tie-rod end retaining nut.
Discard the nut.
NOTE: Use a T50 Torx driver to prevent the
6.
ball joint from rotating.
Loosen the lower arm ball joint retaining nut.
CAUTIONS:
7.
Leave the lower arm ball joint retaining
nut in place to protect the ball joint stud.
Protect the ball joint seal using a soft
cloth to prevent damage.
Using a suitable
arm from the wheel knuckle.
1. Use a soft faced hammer to strike the
lower arm.
2. Remove and discard the retaining nut.
http://vnx.su
204-04 Wheels and
two leg puller, detach the lower