union.
Remove the high pressure fuel supply lines.
Install blanking caps to the open threaded
ports on the fuel injectors and fuel supply
manifold.
Discard the high pressure fuel supply lines.
49. Remove the high pressure fuel supply line
bracket.
50.
NOTE: Maintain pressure on the high
pressure fuel supply line to keep the olive in
contact with the fuel injection pump and fuel
supply manifold cone while unscrewing the
unions.
NOTE: While maintaining the pressure on the
high pressure fuel supply line, clean and
vacuum foreign material from the line and
unions.
Remove the high pressure fuel supply line.
Install blanking caps to the open threaded
ports on the fuel injection pump and fuel
injection supply manifold.
NOTE: Make a note of the orientation of the
51.
clamp to make sure it is positioned in exactly
the same position when installed.
Remove the high pressure fuel supply line clamp.
Discard the high pressure fuel supply line.
52. Remove the fuel supply manifold bracket lower
retaining bolt.
53. Remove the fuel supply manifold bracket and the
fuel supply manifold.
http://vnx.su