-
8
9
-
2. To install, reverse the removal procedure.
Removal Details
Item 5 : Accelerator cable, outer cable to throttle body
Item 9 : Throttle body seal
NOTE: Discard the throttle body seal.
Installation Details
Item 9 : Throttle body seal
NOTE: Install a new throttle body seal.
Item 8 : Throttle body
NOTE: Inspect the intake manifold to throttle body interface for loose plastic material
produced by the throttle body retaining bolts during initial assembly.
Item 7 : Throttle body retaining bolts
Throttle body
See Installation Detail
Throttle body seal
See Removal Detail
See Installation Detail
1. Rotate and detach the accelerator cable from the
throttle body accelerator cable retaining bracket.
NOTE: Hand start each throttle body
1.
retaining bolt by three full turn's.
Tighten the throttle body retaining bolts in the
order indicated.
http://vnx.su