Ford Transit 2002 Owner's Manual page 72

holes.
CAUTION: While tightening the
9.
crossmember retaining bolts, make sure the
crossmember does not move.
Install the crossmember retaining bolts
(transmission jack removed for clarity).
10. Remove the securing strap
jack.
11. Install the engine support insulator center bolt.
NOTE: Use a 5 mm Allen key to prevent the
12.
ball joint from rotating.
Attach the stabilizer bar connecting links to the
stabilizer bar on both sides.
13. WARNING: Install a new lower arm ball
joint retaining nut. Failure to follow this
instruction may result in personal injury.
CAUTION: Protect the heat shield using
a soft cloth to prevent damage.
NOTE: Use a T50 Torx driver to prevent the
ball joint from rotating.
Attach the lower arm to the wheel knuckle on
both sides.
WARNING: Install a new tie-rod end
14.
retaining nut. Failure to follow this
instruction may result in personal injury.
NOTE: Use a 5 mm Allen key to prevent the
ball joint stud from rotating.
Attach the tie-rod end to the wheel knuckle on
both sides.
15. Install the front wheels and tires. For additional
http://vnx.su
and the transmission