Ford Transit 2002 Owner's Manual page 416

Installation
1. Using the special tool, loosen the camshaft pulley
retaining bolts.
2. Install the special tool.
CAUTIONS:
3.
Do not kink the timing belt, the bend
diameter must not be less than 35 mm.
Do not rotate the crankshaft. If
necessary check if the crankshaft is touching
the timing peg.
NOTE: The clip of the timing belt tensioner
must not be hooked into the pressed steel
cover.
NOTE: Install a new timing belt.
Install the timing belt.
http://vnx.su