Ford Transit 2002 Owner's Manual page 318

11. Install the engine support insulator center
retaining bolt.
WARNING: Install new tie-rod end
12.
retaining nuts. Failure to follow this
instruction may result in personal injury.
NOTE: Use a 5 mm Allen key to prevent the
ball joint stud from rotating.
Attach the tie-rod end to the wheel knuckle on
both sides.
NOTE: Use a 5 mm Allen key to prevent the
13.
ball joint from rotating.
Attach the stabilizer bar connecting link to the
strut and spring assembly on both sides.
NOTE: Make sure the collar on the hose is
14.
inserted fully into the quick release coupling.
Connect the power steering reservoir return hose
quick release coupling to the power steering fluid
cooler.
15. Lower the vehicle.
16. WARNING: Install a new steering
column shaft to steering gear pinion
extension pinch bolt. Failure to follow this
http://vnx.su