Ford Transit 2002 Owner's Manual page 729

CAUTIONS:
98.
Use an open-ended wrench to prevent
the component from turning.
Make sure the tool used to tighten the
high-pressure fuel supply line unions is used
at the top of the union as this is where there
is most material. Failure to follow this
instruction may result in damage to the
union.
Tighten the high- pressure fuel supply line unions
of cylinder one and four to the fuel injectors.
CAUTION: Make sure the tool used to
99.
tighten the high-pressure fuel supply line
unions is used at the top of the union as this
is where there is most material. Failure to
follow this instruction may result in damage
to the union.
Tighten the high-pressure fuel supply line unions
of cylinder one and four to the fuel injection
supply manifold.
CAUTION: Make sure the tool used to
100.
tighten the high-pressure fuel supply line
unions is used at the top of the union as this
is where there is most material. Failure to
follow this instruction may result in damage
to the union.
Tighten the high-pressure fuel supply line
unions.
101. CAUTIONS:
Use an open-ended wrench to prevent
the component from turning.
Make sure the tool used to tighten the
high-pressure fuel supply line unions is used
at the top of the union as this is where there
is most material. Failure to follow this
instruction may result in damage to the
union.
Tighten the high- pressure fuel supply line unions
of cylinder two and three to the fuel injectors.
http://vnx.su