Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel -
Engine—Vehicles Without: Common Rail
Fuel Injection
Disassembly
Special Tool(s)
Slide Hammer
205-047 (15-011)
Universal Flange Holding Wrench
205-072 (15-030A)
Locking Tool, Flywheel
303-393 (21-168)
Remover/Installer, Hose Clamp
303-397 (24-003)
Mounting Stand
303-435 (21-187)
Mounting Bracket for 303-435 (21-187)
303-435-06 (21-031B)
Adapter for 205-047
303-633 (21-227)
Remover, Camshaft Sprocket
303-651 (21-229)
Remover, Fuel Injection Pump Pulley
310-095 (23-067)
General Equipment
Scraper
CAUTION: Diesel fuel injection equipment is manufactured to very precise tolerances
and fine clearances. It is therefore essential that absolute cleanliness is observed when
working with these components. Always fit blanking plugs to any open orifices or lines.
Transit/Tourneo Connect 2002.5 (06/2002-)
All vehicles
1. Using the special tool, attach the engine to the
mounting stand.
http://vnx.su
Print