Table of Contents
Advertisement
Poor idling and glow plug
indicator is flashing
Poor idling
Engine stumbling and glow
plug indicator is flashing
Engine stumbling
*
DTC detected.
*
Low fuel tank fuel
level.
*
Air cleaner element
blocked.
*
Fuel filter blocked.
*
Fuel injector(s).
*
Incorrect or
contaminated fuel.
*
Air ingress into the
fuel lines.
*
EGR valve sticking
open.
*
EGR vacuum
regulator valve.
*
IAT sensor.
*
MAP sensor.
*
CKP sensor.
*
Knock sensor (KS).
*
Fuel injection
supply manifold fuel
pressure sensor.
*
Fuel inlet metering
valve.
*
Fuel pump.
*
Dual mass flywheel.
*
DTC detected.
*
Low fuel level.
*
Acceleration pedal
position (APP)
sensor.
*
Fuel injector(s).
*
Fuel pump.
*
Fuel injection
supply manifold fuel
pressure sensor.
*
Dual mass flywheel.
http://vnx.su
damage. INSTALL a new dual mass
flywheel as necessary.
*
REFER to WDS. RETRIEVE the DTCs
using WDS. INVESTIGATE and
RESOLVE all stored DTCs. If the
concern persists, GO to Pinpoint Test
C.
*
CHECK the fuel tank fuel level is
greater than four litres. If the fuel tank
fuel level is less then four litres, FILL
with fuel.
*
INSTALL a new air cleaner element.
*
GO to Pinpoint Test
B.
*
GO to Pinpoint Test
A.
*
CHECK for signs of contamination
such as strange odors from the fuel
tank.
*
CHECK for signs of water or petrol in
the diesel.
*
If contaminated fuel is found, GO to
Pinpoint Test
C.
*
REFER to:
Fuel System - 75 PS/90 PS
(310-00A Fuel System - General
Information, Diagnosis and Testing).
*
REFER to:
Engine Emission Control -
75 PS/90 PS
(303-08B Engine
Emission Control - 1.8L Duratorq-TDCi
(Lynx) Diesel/1.8L Duratorq-TDDi
(Lynx) Diesel, Diagnosis and Testing).
*
REFER to WDS.
*
REFER to WDS.
*
REFER to WDS.
*
REFER to WDS.
*
REFER to WDS.
*
REFER to WDS.
*
GO to Pinpoint Test
B.
*
INSPECT the dual mass flywheel for
damage. INSTALL a new dual mass
flywheel as necessary.
*
REFER to WDS.
*
CHECK the fuel tank level is greater
than four litres. If the fuel tank level is
less than four litres, FILL with fuel.
*
REFER to WDS.
*
GO to Pinpoint Test
A.
*
GO to Pinpoint Test
B.
*
REFER to WDS.
*
INSPECT the dual mass flywheel for
damage. INSTALL a new dual mass
Hide quick links:
Advertisement
Table of Contents
