Tie-Rod End; Tie-Rod End Boot; Drag Link; Dust Seal - Ford TRADER Workshop Manual

MANUAL STEERING
N
9TGONX.()11
9TGONX.()12
Removal note
Tie-rod end
1 . Separate the tie-rod end from the knuckle arm
with
the
SST.
Locknut
1. Mark the tie-rod end locknut for reference during installa-
tion before loosening.
Tie-rod end boot
1. Secure the tie-rod end in a vise. Place a chisel against the
boot and hold it at the angle shown. Remove the boot.
Caution
• Do not scar the part where the boot attaches to the
tie-rod end.
1----.:::::::::-"--;r:IIT~==7./~
Drag link
1. Separate the drag link with the SST.
\'
'iiI·iii4i.t
Dust seal
1. Remove the dust seal with the SST.
N-9