Ford Transit 2002 Owner's Manual page 769

NOTE: Make sure that the inside of the
charge air cooler outlet hose is clean and free
from any oil residue, as this will reduce the
installation grip of the hose to the charge air
cooler.
NOTE: Install a new charge air cooler outlet
hose retaining clamp.
Install the charge air cooler outlet pipe.
Clean the inside of the charge air cooler
outlet hose.
Install the charge air cooler outlet hose
retaining clamp in the same position as
when removed.
76. Install the engine upper cover.
77. Tighten the strut and spring assembly top mount
nuts on both sides.
78. WARNING: Install a new steering
column shaft to the steering gear pinion
extension retaining bolt. Failure to follow this
instruction may result in personal injury.
NOTE: Make sure that the road wheels are in
the straight ahead position.
Connect the steering column shaft to the
steering gear pinion extension.
79. Install the air cleaner.
For additional information, refer to:
(303-12 Intake Air Distribution and Filtering,
Removal and Installation).
80. Fill and bleed the cooling system.
For additional information, refer to:
System Draining, Filling and Bleeding
Engine Cooling, General Procedures).
81. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
http://vnx.su
Air Cleaner
Cooling
(303-03
Power
(211-00 Steering System
(211-00