detach the cables from the bracket.
WARNING: Support the engine and
33.
transaxle assembly on wooden blocks and
secure it with suitable retaining straps.
Failure to follow these instructions may
result in personal injury.
Position the
workshop table
and carefully lower the vehicle, until the engine
and transaxle assembly is supported by the
workshop
table.
34. Using the special tool, disconnect the coolant
hoses from the thermostat housing.
35. Disconnect the coolant hose from the coolant
distribution pipe.
36. Remove the engine rear mount center retaining
nut.
Discard the nut.
37. Remove the engine front mount retaining nuts.
Discard the nuts.
http://vnx.su
under the vehicle