Ford Transit 2002 Owner's Manual page 465

308-204 (16-067)
General Equipment
Steel straightedge
Workshop hoist
Studs M6 x 1020
Bolt, M8 x 40
Bolt M10 x 70
Materials
Name
High-temperature
grease
Sealant
Sealant
Sealant
Specification
ESD-M1C220-A
WSK-M4G320-A
WSK-M2G348-A5
WSS-M4G323-A7
Assembly
NOTE: Install a new oil seal in the crankshaft
1.
rear oil seal carrier.
NOTE: Do not tighten the bolts of the
crankshaft rear oil seal carrier for the
moment.
Install the rear crankshaft oil seal carrier.
2. Install the crankshaft position (CKP) sensor and
the CKP sensor bracket.
3.
seal must be fully installed in the special
tool.
NOTE: Install the new crankshaft rear oil
seal.
Install the crankshaft rear oil seal using the
special tool and two used flywheel bolts.
4. Remove the special tool .
NOTE: Install a new oil pump gasket.
5.
NOTE: Do not tighten the oil pump bolts for
http://vnx.su
CAUTION: The new crankshaft rear oil