Ford Transit 2002 Owner's Manual page 340

3. CAUTIONS:
Remove the tape from the clockspring
before installing the steering wheel.
Make sure the spacing collar is correctly
located when installing the steering wheel.
Do not install the steering wheel if the
spacing collar is missing.
To assemble, reverse the disassembly procedure.
CAUTIONS:
4.
Make sure the ignition lock cylinder is
correctly installed.
A new steering column must be installed
if the ignition lock cylinder fails to operate
correctly.
Check the operation of the ignition lock cylinder
twice in the following sequence:
1. Turn the ignition key to the 0 position and
make sure the steering column is free to
rotate.
2. Remove the ignition key and make sure
the steering column is locked.
3. Insert the ignition key and turn the ignition
key to position I and make sure the
steering column is free to rotate.
http://vnx.su