Ford Transit 2002 Owner's Manual page 690

head sealing washers.
NOTE: Install new fuel injector retaining
clamps.
NOTE: Install new fuel injector retaining
clamps retaining bolts.
Install the fuel injectors and retaining clamps.
Tighten the bolts in two stages.
5 Nm
90 degrees
23. Install the glow plugs.
24. Install the glow plug wiring harness.
25. Install the engine front lifting eye.
CAUTION: Push the fuel injector fuel
26.
return lines gently into the fuel injectors.
Failure to follow this instruction my result in
damage to the fuel injector fuel return line O-
ring seals.
NOTE: Install new fuel injector fuel return
line O-ring seals and new fuel injector fuel
return line clips.
Attach the fuel return lines to the fuel injectors.
1. Connect the fuel injector fuel return line to
the fuel injector.
2. Install the fuel injector fuel return line clip.
NOTE: Install a new cylinder head
27.
temperature (CHT) sensor.
Using the special tool, install the CHT sensor.
http://vnx.su