Ford Transit 2002 Owner's Manual page 727

Remove the blanking plugs from the
high-pressure fuel supply line, the fuel
injector and the fuel injection supply
manifold at the last possible moment. Failure
to follow this instruction may result in foreign
matter ingress to the fuel injection system.
NOTE: Do not tighten the high-pressure fuel
supply line union at this stage.
NOTE: Maintain pressure on the high-
pressure fuel supply line to keep the line in
contact with the fuel pump and fuel injection
supply manifold cones while installing the
unions.
Install the high-pressure fuel supply line.
1. Install the high-pressure fuel supply line
union to the fuel injection supply manifold.
2. Install the high-pressure fuel supply line
union to the fuel pump.
Discard the blanking plugs.
92. CAUTIONS:
Use an open-ended wrench to prevent
the component from turning.
Do not allow the unions to hit the olive
ends of the high-pressure fuel supply line as
this may damage the ends of the line and
allow foreign material to enter the fuel
injection system.
Remove the blanking plugs from the
high-pressure fuel supply line, the fuel
injector and the fuel injection supply
manifold at the last possible moment. Failure
to follow this instruction may result in
foreign matter ingress to the fuel injection
system.
NOTE: To aid identification of the high-
pressure fuel supply lines, the unions at the
fuel injector end are etched with the cylinder
number.
NOTE: Do not tighten the high-pressure fuel
supply line unions at this stage.
NOTE: Maintain pressure on the high-
pressure fuel supply line to keep the lines in
contact with the fuel injector cones while
hand installing the union.
Install the high-pressure fuel supply lines to the
fuel injectors.
93. CAUTIONS:
Do not allow the unions to hit the olive
ends of the high-pressure fuel supply line as
this may damage the ends of the line and
allow foreign material to enter the fuel
injection system.
http://vnx.su