70. Detach the power steering line from the steering
gear (crossmember shown removed for clarity).
1. Remove the bolt.
2. Rotate the clamp clockwise.
Allow the fluid to drain into a suitable
container.
71. Using a suitable
transmission
crossmember.
72. Using a suitable
securing
crossmember and lower arm assembly to the
transmission
jack.
73. Remove the crossmember retaining bolts
(support shown removed for clarity).
74. Remove the crossmember.
WARNING: Support the engine and
75.
transaxle assembly on wooden blocks.
Failure to follow these instructions may
result in personal injury.
CAUTION: Support the engine on the oil
pan flange.
Using suitable securing straps, secure the engine
and transaxle assembly on the workshop table.
http://vnx.su
jack, support the
strap, secure the