Power Steering - Power Steering Pump—
1.8L Duratorq-TDCi FGT (55kW/75PS) -
Lynx/1.8L Duratorq-TDDi (55kW/75PS) -
Lynx/1.8L Duratorq-TDCi (66kW/90PS) -
Lynx/1.8L Duratorq-TDCi FGT
(66kW/90PS) - Lynx/1.8L Duratorq-TDCi
VNT (66kW/90PS) - Lynx/1.8L Duratorq-
TDCi VNT (55kW/75PS) - Lynx/1.8L
Duratorq-TDCi (81kW/110PS) - Lynx
Removal and Installation
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Remove the accessory drive belt.
For additional information, refer to:
Drive Belt - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel
Accessory Drive, Removal and Installation).
2. Remove the power steering pump lower
retaining bolts.
3. Lower the vehicle.
4. Detach the coolant expansion tank from the
wheelhouse assembly and position it to one
side.
1. Remove the bolt.
2. Detach the coolant expansion tank.
5. Detach the power steering fluid reservoir from
the wheelhouse assembly.
CAUTIONS:
6.
Cap the power steering fluid reservoir
hose to prevent fluid loss or dirt ingress.
Cap the power steering fluid reservoir
http://vnx.su
Print
Accessory
(303- 05