Ford Transit 2002 Owner's Manual page 118

a soft cloth to prevent damage.
NOTE: Use a T50 Torx driver to prevent the
ball joint from rotating.
Attach the lower arm to the wheel knuckle.
NOTE: Install a new tie-rod end retaining
4.
nut.
NOTE: Use a 5 mm Allen key to prevent the
ball joint from rotating.
Attach the tie-rod end to the wheel knuckle.
5. WARNING: Install a new wheel hub
retaining nut. Failure to follow this
instruction may result in personal injury.
With the aid of another technician, apply the
brakes and preload the wheel bearing by
installing the new wheel hub retaining nut.
6. Check the transmission fluid level. For additional
information, refer to Section
Transmission/Transaxle.
7. Install the front wheel and tire. For additional
information, refer to Section
Tires.
CAUTION: Use a socket to tighten the
8.
wheel hub retaining nut to prevent damage.
Tighten the wheel hub retaining nut.
9. Tighten the strut and spring assembly top mount
nuts.
http://vnx.su
308-03 Manual
204-04 Wheels and