NOTE: Coat the camshaft taper and oil seal
12.
lip with engine oil.
Using the special tool, install the camshaft oil
seal.
13. Install the intake manifold.
14. Tighten the exhaust manifold lower retaining
bolts.
15. Tighten the exhaust manifold upper retaining
bolts.
Tighten the EGR flange bolts (2 bolts).
16. Install the components on the right- hand side of
the cylinder head.
1. Engine lifting eye.
2. Coolant connection.
Coolant hose.
http://vnx.su