Ford Transit 2002 Owner's Manual page 404

2. Turn the special tool clockwise and pull it
out.
Installation
1. Install the valve stem oil seal.
Coat the valve stem with
Cover the valve stem grooves with the oil
seal installation sleeve.
Slide the valve stem oil seals onto the
valve stem and remove the oil seal
installation sleeve.
NOTE: Check that the valve collets are
2.
correctly seated.
Install the valve springs with the valve spring
retainers.
1. Compress the valve springs.
2. Install the valve collets.
3. Detach Special Tool 303-363.
4. Repeat the operations for all the other cylinders.
5. Coat the valve tappets with
6. Install the camshafts.
For additional information, refer to
this section.
http://vnx.su
engine oil .
engine oil and insert.
Camshafts in