Ford Transit 2002 Owner's Manual page 608

19. Attach the power steering high pressure pipe
bracket to the timing belt cover stud connection.
20. Attach the power steering high pressure pipe to
the power steering pump.
21. Connect the oil pressure switch electrical
connector.
NOTE: Install the clip at a 45 degree angle to
22.
the horizontal.
Install the oil separator.
23. Raise and support the vehicle. For additional
information, refer to Section
Lifting.
NOTE: Use a new gasket.
24.
Attach the turbocharger oil supply and return
http://vnx.su
100- 02 Jacking and