CAUTIONS:
Avoid any impact on the wheel speed sensor ring.
Make sure the wheel speed sensor ring is clean.
Avoid any contact between the wheel speed sensor ring and a magnetic surface.
4. Using the special tools, remove and discard the
wheel bearing.
Installation
CAUTION: Make sure the wheel bearing
1.
is installed into the wheel knuckle with the
wheel speed sensor ring, colored black,
towards the inner face of the wheel knuckle.
NOTE: Install a new wheel bearing.
Using the special tool, install the new wheel
bearing.
NOTE: Make sure the circlip does not cover
2.
the wheel speed sensor.
Install the circlip.
3. Using the special tools, install the wheel hub.
http://vnx.su