Ford Transit 2002 Owner's Manual page 968

CAUTION: Secure the excess fuel injection timing solenoid wiring harness using a
cable-tie. Failure to follow this instruction may result in the failure of the fuel injection
timing solenoid wiring harness.
13. Install the A/C compressor support bracket (if
equipped).
14. Install the generator.
For additional information, refer to:
1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-
TDDi (Lynx) Diesel, Vehicles Built Up To:
05/2003 (414-02 Generator and Regulator,
Removal and Installation) /
Generator - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
Vehicles Built From: 05/2003
and Regulator, Removal and Installation) /
Generator - 1.8L Duratorq-TDCi (Lynx) Diesel,
Vehicles Built From: 05/2007
and Regulator, Removal and Installation).
15. Install the fuel injection pump back plate and
support bracket retaining bolts.
16. Using a cable-tie, secure the fuel injection timing
solenoid wiring harness.
Make a loop with the excess fuel injection
timing solenoid wiring harness and using a
cable-tie secure the loop.
http://vnx.su
Generator -
(414-02 Generator
(414-02 Generator