Ford Transit 2002 Owner's Manual page 75

5. Remove the brake disc.
Remove and discard the retaining washer
(if equipped).
Vehicles with anti-lock brakes
6. Detach the wheel speed sensor from the wheel
knuckle.
All vehicles
CAUTION: Leave the tie-rod end
7.
retaining nut in place to protect the ball joint
stud.
NOTE: Use a 5 mm Allen key to prevent the
ball joint stud from rotating.
Loosen the tie-rod end retaining nut.
8. CAUTION: Protect the ball joint seal
using a soft cloth to prevent damage.
Using the special tool, detach the tie-rod end
from the wheel knuckle.
1. Release the tie-rod end.
2. Remove and discard the tie rod end
retaining nut.
9. Remove and discard the wheel hub retaining nut.
http://vnx.su