connections to prevent fluid loss and dirt
ingress.
Using the special tool, disconnect the refrigerant
line to the condenser at the evaporator.
Discard the O-rings.
13. Detach the refrigerant line bracket from the
radiator crossmember.
CAUTION: Cap the refrigerant line
14.
connections to prevent fluid loss and dirt
ingress.
Detach the refrigerant line from the condenser.
Discard the O-rings.
15. Detach the refrigerant lines from the wheelhouse
assembly.
16. Detach the dehydrator from the fender.
1. Disconnect the refrigerant line from the
dehydrator.
2. Remove the dehydrator bolts and nut.
NOTE: Pull the refrigerant lines through the
17.
hole in the fender.
Remove the refrigerant lines from the engine
compartment.
18. Raise and support the vehicle. For additional
http://vnx.su