Ford Transit 2002 Owner's Manual page 306

Cap the power steering line to prevent
fluid loss or dirt ingress.
Cap the power steering pump pressure
adapter to prevent fluid loss or dirt ingress.
Disconnect the power steering line from the
power steering pump (shown from underneath
for clarity).
1. Using a suitable wrench, hold the power
steering pump pressure adapter.
2. Disconnect the union.
Discard the O-ring seal.
7. Remove the power steering pump to steering
gear pressure line.
Installation
CAUTION: Care must be taken to
1.
prevent dirt ingress.
Install a new O-ring seal onto the power steering
pump to steering gear line union.
2. Install new O-ring seals onto the power steering
lines.
3. To install reverse the removal procedure.
4. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
Steering System - General Information, General
Procedures).
http://vnx.su
Power
(211-00 Steering System
(211-00