Ford Transit 2002 Owner's Manual page 928

Item 12 : Number four fuel injector & fuel injection supply manifold blanking caps
CAUTION: Remove the blanking plugs from the fuel injector and the fuel injection
supply manifold at the last possible moment. Failure to follow this instruction may result
in foreign matter ingress to the fuel injection system.
Item 11 : Number four fuel injector, high-pressure fuel supply line
CAUTIONS:
Remove the blanking plugs from the high-pressure fuel supply line at the last
possible moment. Failure to follow this instruction may result in foreign matter ingress to
the fuel injection system.
Do not allow the unions to hit the ends of the high-pressure fuel supply line. Failure
to follow this instruction may result in damage to the ends of the line and allow foreign
material to enter the fuel injection system.
NOTE: Lubricate the high-pressure fuel supply line union threads with clean lubricant.
NOTE: To aid installation of the high-pressure fuel supply line, the union at the fuel
injector end is etched with the cylinder number.
NOTE: Install a new high-pressure fuel supply line.
Item 9 : High-pressure fuel supply line to number four fuel injector union
CAUTION: Use an open-ended wrench to prevent the component from turning.
1. Install the fuel injector bolts.
Tighten the bolts in two stages.
Stage 1: 5 Nm
Stage 2: 90 degrees
1. Remove and discard the blanking plugs.
1. Remove and discard the blanking plugs.
http://vnx.su