17. Using the special tool, install the crankshaft
position (CKP) sensor retaining bracket.
18. Remove the special tool.
19.
CAUTION: Make sure that the sealer
does not enter the ladder frame blind holes.
Failure to follow this instruction may result in
damage to the engine assembly.
NOTE: Do not damage the mating faces.
NOTE: The mating faces and blind holes must
be free of oil and sealer residue.
Clean the mating faces of the oil pan and ladder
frame.
NOTE: Install the oil pan within ten minutes
20.
of applying the sealer.
NOTE: Once the oil pan has contact with the
ladder frame it must not be removed.
Install the oil pan.
Apply a 2,5 mm diameter bead of
gasket and sealant
(dotted line).
Tighten bolts and nuts in the sequence
shown.
http://vnx.su
silicone
to the ladder frame