5. Repeat the removal steps for the remaining
valves.
Installation
1.
NOTE: Follow the procedure recommended
by the grinding paste manufacturer.
NOTE: Install all parts in the same position
from which they were removed.
Regrind the valves
2. Thoroughly clean all components to remove any
traces of grinding paste.
3. Coat valve stem
4. Install the valve stem oil seal.
Cover the grooves in the valve stems with
the oil seal installation sleeve.
Slide the valve stem seal onto the valve
stem and remove the installation sleeve.
NOTE: Check that the valve collets are
5.
correctly seated.
Install the valve springs with the valve spring
retainers.
1. Compress the valve spring.
2. Install the valve collets.
6. Repeat the installation steps for the remaining
valves.
http://vnx.su
usinggrinding paste
.
withlubricant
and insert.