Ford Transit 2002 Owner's Manual page 726

contact with the fuel injector cones while
hand installing the union.
Install the high-pressure fuel supply lines to the
fuel injectors.
Discard the blanking plugs.
88. CAUTIONS:
Do not allow the unions to hit the olive
ends of the high-pressure fuel supply line as
this may damage the ends of the line and
allow foreign material to enter the fuel
injection system.
Remove the blanking plugs from the
high-pressure fuel supply line, the fuel
injector and the fuel injection supply
manifold at the last possible moment. Failure
to follow this instruction may result in foreign
matter ingress to the fuel injection system.
NOTE: Do not tighten the high-pressure fuel
supply line unions at this stage.
NOTE: Maintain pressure on the high-
pressure fuel supply line to keep the lines in
contact with the fuel injection supply
manifold cones while installing the union.
Install the high-pressure fuel supply lines of
cylinder one and four to the fuel supply manifold.
Discard the blanking plugs.
89. NOTE: Make sure the clamp is installed in
the same position as removed.
Install the high-pressure fuel supply line clamp
to the high-pressure fuel supply line.
NOTE: Install a new high-pressure fuel
90.
supply line union.
Lubricate the high-pressure fuel supply line
union threads with clean ISO 4113 lubricant
from the high-pressure fuel supply line parts kit.
91. CAUTIONS:
Do not allow the unions to hit the olive
ends of the high-pressure fuel supply line as
this may damage the ends of the line and
allow foreign material to enter the fuel
injection system.
http://vnx.su