Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel -
Crankshaft Front Seal
In-vehicle Repair
Special Tool(s)
Universal Flange Holding Wrench
205-072 (15-030A)
Gauge, Bolt Angle
303-174 (21-540)
Remover, Crankshaft Seal
303-293 (21-143)
Aligner, Oil Pump
303-652 (21-230)
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Remove the accessory drive belt.
For additional information, refer to:
Drive Belt - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel
Accessory Drive, Removal and Installation).
2. Using the special tool, remove the crankshaft
pulley.
Discard the bolt.
3. Using the special tool, remove the crankshaft
seal.
Discard the seal.
Installation
NOTE: Install a new crankshaft front seal.
1.
Using the special tool, install the crankshaft front
seal.
http://vnx.su
Print
Accessory
(303- 05