Ford Transit 2002 Owner's Manual page 961

Item 13 : Fuel injector high-pressure fuel supply lines clamp
Item 10 : Fuel injector high-pressure fuel supply lines clamp
NOTE: Do not tighten the fuel injector high-pressure fuel supply lines clamp at this stage.
NOTE: Make sure the fuel injector high-pressure fuel supply lines clamp is installed in the
same position as removed.
Item 9 : High-pressure fuel supply line clamp
NOTE: Make sure the high-pressure fuel supply line clamp is installed in the same position
as removed.
Item 8 : High-pressure fuel supply line and clamp
CAUTIONS:
Do not allow the unions to hit the ends of the high-pressure fuel supply line. Failure
to follow this instruction may result in damage to the ends of the line and allow foreign
material to enter the fuel injection system.
Remove the blanking plugs from the high-pressure fuel supply line at the last
possible moment. Failure to follow this instruction may result in foreign matter ingress to
the fuel injection system.
NOTE: Maintain pressure on the high-pressure fuel supply line to keep the line in contact
with the fuel pump and fuel injection supply manifold cone, while installing the union.
2. Remove and discard the blanking caps from the
fuel injector and the fuel injection supply
manifold.
http://vnx.su