Install the fuel pump seal retainer.
4. Attach the fuel injection pump pulley to the fuel
pump sprocket.
Apply
sealer
pulley and to the outer edge of the fuel
pump pulley bolt holes.
5. Install the fuel pump pulley.
6. Install the accessory drive belt idler pulley.
NOTE: Install a new crankshaft front seal.
7.
Using the special tool, install the crankshaft front
seal.
Vehicles without common rail fuel injection
NOTE: Install a new crankshaft pulley
8.
retaining bolt.
Using the special tool, install the crankshaft
pulley.
http://vnx.su
to the fuel injection pump