2. Attach both front camshaft bearing caps.
Stage 1: 10 Nm.
Stage 2: 19 Nm.
3. Install the camshaft oil seals using the special
tool.
Lubricate the camshaft and the sealing lip
of the oil seals with
Install new oil seals using the special tool,
a washer and an M10x70 bolt.
NOTE: The camshaft timing pulleys
must be able to turn freely on the
camshafts. Do not tighten the bolts.
Attach the camshaft timing pulleys.
4. Install a new timing belt.
For additional information, refer to
this section.
http://vnx.su
engine oil
.
Timing belt
in