Engine-1.8L Duratec-Dohc (85Kw/115Ps)-Zetec-Crankshaft Front Seal - Ford Transit 2002 Owner's Manual

Engine - 1.8L Duratec-DOHC
(85kW/115PS) - Zetec - Crankshaft Front
Seal
In-vehicle Repair
Special Tool(s)
Remover, Crankshaft Oil Seal
303-293 (21-143)
Installer, Crankshaft Oil Seal
303-395 (21-171)
Installer, Front Crankshaft Oil Seal
303-684 (21-243)
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Remove the timing belt.
For additional information, refer to
this section.
NOTE: FRONT marking and installation
2.
position of the timing pulley thrust washer.
Remove the crankshaft timing pulley.
1. Pull off the crankshaft timing pulley.
2. Remove the timing pulley key and thrust
washer.
3. Remove the crankshaft front oil seal.
Installation
NOTE: Correct seating of sealing lip on the
1.
installation sleeve.
Push crankshaft front oil seal to approx. the
middle position on the special tool.
http://vnx.su
Print
Timing belt in