Power Brake Actuation-Brake Booster-Rhd Fwd - Ford Transit 2002 Owner's Manual

Power Brake Actuation - Brake Booster—
RHD FWD
Removal and Installation
Special Tool(s)
Lifting bracket,Engine
303-122 (21-068A)
Disconnect tool, Spring- Lock Coupling 5/8 inch (black)
412-038 (34-003)
General Equipment
Engine hoist.
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Remove the brake master cylinder. For additional
information, refer to Section
Brake Actuation.
2. Remove the charge air cooler (if equipped). For
additional information, refer to Section
Intake Air Distribution and
3. Disconnect the electrical connectors from the
pedal position switches.
1. Speed control deactivation switch (if
equipped).
2. Stop lamp switch.
3. Clutch position switch.
4. Remove the pedal position switches.
1. Speed control switch (colored green) (if
equipped).
2. Stop lamp switch (colored grey).
3. Clutch position switch (colored red).
5. Detach the brake booster actuating rod from the
brake pedal.
1. Depress the brake pedal.
2. Depress the clip.
3. Remove the brake booster actuating rod
pin.
http://vnx.su
Print
206-06 Hydraulic
303-12
Filtering.