Ford Transit 2002 Owner's Manual page 76

NOTE: Use a T50 Torx driver to prevent the
10.
ball joint from rotating.
Loosen the lower arm ball joint retaining nut.
11. CAUTIONS:
Leave the lower arm ball joint retaining
nut in place to protect the ball joint stud.
Protect the ball joint seal using a soft
cloth to prevent damage.
Protect the heat shield using a soft cloth
to prevent damage.
Using a suitable
arm from the wheel knuckle.
1. Use a soft faced hammer to strike the
lower arm.
2. Remove and discard the retaining nut.
12. CAUTION: Support the halfshaft. The
inner joint must not be bent more than 18
degrees. The outer joint must not be bent
more than 45 degrees.
Using a suitable
wheel hub from the halfshaft.
13. Remove the wheel knuckle to suspension strut
pinch bolt.
14. Using the special tool, remove the wheel
http://vnx.su
two leg puller, detach the lower
three leg puller, detach the