7. Detach the power steering pipe retaining bracket
from the cylinder head.
8. Using the camshaft groove as a guide, turn the
crankshaft to five degrees before top dead
center (TDC).
9. Remove the accessory drive belt.
For additional information, refer to:
Drive Belt - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel
Accessory Drive, Removal and Installation).
10. Remove the generator drive coupling.
1. Driveshaft intermediate bearing retaining
bolts.
2. Vibration damper retaining bolts.
11. Detach the starter motor and position it to one
side.
http://vnx.su
Accessory
(303- 05