Ford Transit 2002 Owner's Manual page 738

Vehicles with air conditioning
11. Install the air conditioning (A/C) compressor
retaining bracket.
All vehicles
NOTE: Install a new oil pump pickup tube O-
12.
ring seal.
Install the oil pump pick-up tube.
NOTE: Install new O-ring seals.
13.
Install the oil pump connecting pipe.
NOTE: Do not damage the mating faces.
14.
NOTE: The mating faces and blind holes must
be free of oil and sealer residue.
Clean the mating faces of the oil pan and ladder
frame.
15. CAUTION: Make sure that the sealer
does not enter the ladder frame blind holes.
Failure to follow this instruction may result in
damage to the engine assembly.
NOTE: Install the oil pan within ten minutes
of applying the sealer.
NOTE: Once the oil pan has contact with the
ladder frame it must not be removed.
Install the oil pan.
Apply a 2.5 mm diameter bead of
to the ladder frame (dotted line).
Tighten bolts and nuts in the sequence
shown.
http://vnx.su
sealant