Ford Transit 2002 Owner's Manual page 417

Beginning with the crankshaft timing
pulley, working counterclockwise.
4. Make sure that piston No. 1 is still at top dead
center (TDC).
5. NOTE: Make sure that a new component is
installed.
Rotate the timing belt tensioner washer
counterclockwise, tension the timing belt.
1. Hook the timing belt tensioner into the
pressed steel cover.
2. Rotate the timing belt tensioner washer
counterclockwise until the arrow points the
mark and tighten the bolt.
3. Check if the arrow points the mark after
tightening the bolt.
6. Using the special tool, tighten the camshaft
pulley retaining bolts.
7. Remove the special tool.
8. Raise and support the vehicle.
For additional information, refer to:
http://vnx.su
Lifting (100-