Ford Transit 2002 Owner's Manual page 847

NOTE: After releasing the injector lines it is necessary to renew the fuel lines to ensure
complete tightness.
NOTE: The lengths and radii of the bends are matched to the system exactly, and must
not be changed.
NOTE: The fuel injection system does not need bleeding.
The high pressure fuel pipes connect the high pressure pump to the common rail and the
common rail to the individual fuel injectors.
The fuel pipes conveying fuel at high pressure must withstand the maximum system
pressure and the pressure fluctuations.
The four high-pressure fuel lines between the fuel distribution pipe and the injectors all
have the same length.
Fuel injectors
Item Part Number
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
NOTE: When a fuel injector is changed, the fuel injector number found on the injector and
the appropriate cylinder assignment must be entered in the PCM using WDS.
The function of the solenoid valve controlled fuel injectors is to regulate the start of fuel
injection and the quantity of fuel injected according to the instructions received from the
PCM.
Description
Upper inlet choke (control chamber)
Solenoid valve
Solenoid valve spring
Needle valve
Drain bore
Control chamber drain choke
Control chamber
Nozzle openings
Nozzle needle
Nozzle chamber
Nozzle chamber inlet choke
Control chamber lower inlet choke
http://vnx.su